How to Remove Powder Coating, Powder Coating Stripper Solutions, Powder Coat Removers.                

#1-Eco Friendly & Green Powder Coating Removal Products, Powder Coating Stripping Solutions Provided by MILES Chemical Solutions to Strip Powder Coating from Paint Hooks and Reclaim / Recycle Paint Rework.

Environmentally Friendly: Green, Paint Strippers/Paint Removers for Stripping Paint and Powder Coating Removal. E-Coating Paint Removers, Aluminum Strippers, Strip Powder Coating from Galvanized: Zinc and Magnesium-Paint Stripping Products to "Remove Paint from Aluminum" and Strip Paint and Remove Powder Coat from Metal Substrates.

Powder Coating Removal: Product Technologies,  

T   E   C   H   N   I   C   A   L        D   A   T   A 

Green Paint- Stripping Solutions      

T   E   C   H   N   I   C   A   L        D   A   T   A 

DESCRIPTION: MILES #8641

MILES #8641 is an eco-friendly: green, multi-metal safe concentrated paint stripping solution formulated to (use with up to 50% water) to de-laminate cured coatings including: powder coating, e-coating and wet-applied cured coatings from aluminum, zinc, magnesium, brass, stainless steel and steel substrates.  #8641 can be used to clean racks daily and recycle paint rework.

APPLICATION:

MILES #8641 Utilize an immersion tank with lid, polypropylene-evaporation inhibitor-floats, ventilation and a mixer. Charge and maintain (replenish solution-loss) with 50% conc. #8641 and 50% water. Heat to 185F., immerse parts for 30-60 minutes or until coating is completely delaminated. Pressure-rinse parts with water and dry for reprocess. Use 5% of #8644 by tank volume, as required to maintain pH below 4.0, to maintain optimum stripping performance.

Place_Secure_Order_Here

We accept:  

MILES#8612  T   E   C   H   N   I   C   A   L        D   A   T   A

DESCRIPTION: MILES#8612     Powder Coating Removal Video

MILES#8612  ECO-POWDER STRIP-RTU is a ready to use (add no-water), eco-friendly: green, multi-metal safe paint strip solution formulated to dissolve cured coatings including: powder coating, (e-coating-only when heated) and wet-applied cured coatings from aluminum, zinc, magnesium, brass, stainless steel and steel substrates. Used in conjunction with #8635 Evaporation Inhibitor at 5% concentration.  

APPLICATION: 

MILES#8612  ECO-POWDER STRIP-RTU is a unique formula that is used as received with no water dilution, at temperatures of 165F to 185F. Immerse rework parts in an immersion strip tank with a lid, ventilation and a mixer, for 30 to 60 minutes. May be used at Room Temperature for TGIC Powder Coating Removal overnight. Utilize-polypropylene-evaporation inhibitor-floats to reduce evaporation and replenishment requirements. Rinse with warm water and reprocess through Paint. Use with MILES#8635 Evaporation Inhibitor at 5% concentration. Accelerate Powder Coating Removal with 5% adds of MILES #8605 as required to maintain pH between 11.5-12.5 

Place_Secure_Order_Here

We accept:  

MILES#8635 T   E   C   H   N   I   C   A   L        D   A   T   A 

MILES #8635 Eco-Friendly Evaporation Inhibitor  

(Used only with heated Alkaline Stripping Solutions),

for use with MILES #8612

Benefits:

• Reduce Stripping Solution Evaporation and Loss
• Significant Savings by Reducing Replenishment Requirements 
• Maintain Optimum Stripping Performance 
• Extend Strip Bath Life by up to 80% 
• Cleaner Work Area Environment
• Completely Water Soluble and Free Rinsing.

Recommended Use: Begin utilizing at any time on any caustic bath.

Use MILES #8635 at 3%-5% by strip tank volume to maintain a 1/4"inch floating blanket that seals off evaporation of costly chemicals and water, there-by reducing replenishment.

Place_Secure_Order_Here

We accept:

 MILES#8660

DESCRIPTION:

MILES#8660 AMBIENT POWDER STRIP-THIN is a paint strip solution formulated to under-cut: de-laminate and remove Powder Coating from Aluminum and Steel paint rework.  #8660 can be used to strip Aluminum Wheels and e-coat racks: e-coat paint rework when HEATED.

APPLICATION:

MILES#8660 AMBIENT POWDER STRIP-THIN Utilize a stainless steel or polypropylene immersion tank with a lid, ventilation and a mixer. Immerse powder  coated parts & hooks in MILES-#8660 at 50% concentration with water at 150F. to strip powder coated aluminum wheels and powder coat rework parts: remove powder coating in 15 to 20 minutes per 3 mils  cured powder coating. Utilize-polypropylene-evaporation inhibitor-floats to reduce evaporation and replenishment requirements, save on chemical, dollars and extend solution bath life. A pressure (1800-5000psi), water rinse is normally recommended when utilizing under-cutting: de-laminating technologies. The Benefits of under-cutting: de-laminating paint removal process solutions are many, including: easier to remove coating sludge in-sheets, resulting in longer bath life, lower operating cost, utilizing up to 50% water in the process, safer less hazardous for the operator and the environment.

 or Utilize MILES #8660, 100%- neat at ambient room temperatures  for 1-3 hours for cast aluminum and overnight for steel paint hooks. 

For (e-coat removal, utilize #8660 heated only) at 50% concentration with water at temperatures of 150F.-185F. Strip time is 10 minutes to 15 minutes.

Place_Secure_Order_Here

We accept:  

#8659 Non-Methylene Chloride Stripper, Thickened Brush-on Stripper,

Use at Room Temperature, Contains no-hazardous Methylene Chloride.

MILES#8659               T   E   C   H   N   I   C   A   L        D   A   T   A 

DESCRIPTION: #8659 Non-Methylene Chloride Stripper, Aircraft Stripper Alternative, contains no-hazardous methylene chloride.

MILES #8659 Thickened, Brush-on Gel, Room Temperature Stripper.

MILES#8659 a thickened brush-on Gel used at  Room Temperature.

Strip Paint & Remove 3-4 mils of Powder Coating in 30-60 minutes at room temperature. Strip Aluminum Wheels:  BMW, German, European and Japanese wheels require overnight application.

The softened, loose coating can be removed with a water pressure washer, abrasive blasting, spark-less scraper, disposable cloth or steel wool pads, then rinse with soap and water, dry and reprocess through paint or powder coating.  

Place_Secure_Order_Here

We accept:  

How To: Remove Paint & Strip Powder Coating 

Strip Paint: Remove Powder Coating & Recycle Paint Finishing-rework, with MILES Chemical Solutions Powder Coating Stripper, Obtain a Second Chance, at First pass (zero) 0-defect Quality. Remove e-coat, strip powder coating from hooks, racks and fixtures with our metal paint stripper. Eco friendly paint stripper & Green-powder coat stripping solutions to remove     paint & strip powder coating. Safely strip paint from aluminum: remove paint from zinc/magnesium/brass/stainless/ferrous and plated metal substrates    with our Nonhazardous, Powder Stripping Products. 

  Request: Paint Stripping Products-Technical Data 

Additional offerings: Aluminum Paint Strippers, Paint Removal Products, Paint Stripping Service/Coating Removal Service.

Contact us for your specific paint stripper/paint remover product requirements or Paint Stripping Services/Paint Removal Quote and for your  Free: Paint Stripping Products-recommendation: